- Product Details
|Type||Electronic Ballast Production Line|
> seven groups of top and bottom forced hot air convection heating zones.
> Patented heating plates in each zone uniformly transfer heat to the PCBs using forced hot air convection.
> Independent temperature control in each zone to ensure temperature uniformity within the process tunnel.
> Power consumption savings of 1/3 as compared to other systems.
> Patented motorized blower in each zone is designed to ensure stable air pressure, withstand high process temperature and is disturbance-free.
> Audible and light tower alarm for temperature limits, PCB drop, PCB jam and blower malfunction.
> Fast start-up (within 20 minutes) from room temperature to work temperature due to the high efficiency of the motorized heating plates.
> Two (2) groups of forced air convection cooling zones.
Distortion-free Conveyor System with Automated Chain Lubrication
> Combined pin chain rail and mesh belt conveyor system (Note: Mesh belt is not available on machines with center board support. )
> Closed-loop computer control of the conveyor provides a precise and repeatable reflow process.
> Automated chain lubrication system with a computer controlled central reservoir. Lubricant is added directly to the conveyor brush eliminating operator interface for this maintenance.
Fresh Air Recharge System
> Fresh air is supplied to each zone uniformly to provide a rapid process transfer.
Flux Management System
> Air amplifier forces supercharged flux collection and recirculation.
> Flux exhaust chimney with drawer shaped filter net is easy to access for maintenance.
> PC control system with windows based control software.
> Integrated UPS will be automatically activated in case of main power failure and will keep control PC and conveyor running for minimum 8 minutes to send out PCBs inside the oven tunnel.
> Motorized hood lift allows easy access to the inside of the oven for service and maintenance.
> Five (5) profiling ports and integrated profiling software are designed for convenient temperature profiling.
> Swing arm control PC station
> Four (4) emergency stop switches
> Two (2) exhaust ports
> SMEMA interface
> System documentation
|Standard Color||Computer Grey|
|Number Of Heating Zones||Up8/Bottom8|
|Length Of Heating Zones||3121mm|
|Heating pattern||Up& Bottom Hot air|
|Number of Cooling Zones||2|
|Length Of Cooling Zones||600mm|
|Exhaust Volume||10M3/minx2 Exhausts|
|Electric Supply Required||3phase, 380V 50/60Hz|
|Power For Warm Up||32KW|
|Warming Time||Approx. 25 minute|
|Temp. Setting Range||Room Temp. -- 300 degree|
|Temperature Control Method PID + SSR||Standard|
|Temperature Control Precision||± 1.0 degree|
|Temperature Deviation on PCB||± 1.5 degree|
|Commutated Element||Aluminium Alloy Plate|
|Max. Temp. Gap Between Preheat & Reflow Setting||80 degree|
|Max. Temp. Gap Between Preheat Zones Setting||40 degree|
|Max. Temp. Gap Between Reflow Zones Setting||50 degree|
|Process Data & Status Storage||Standard|
|Board Dropped Alarm||Optional|
|Electrical SMEMA Interface||Standard|
|Rail Number||1 Lane|
|Max. Width Of PCB||380mm|
|Components Clearance||Top/ Bottom is 25mm|
|Converyor Direction||L→ R (Option: R→ L)|
|Fixed Rail Side||Front Fixed (Option: Rear Fixed)|
|Transmission Agent||Chain + Mesh|
|Rail Width Adjustment||Auto and Manual (Multi mode)|
|Converyor Speed Range||300~2000mm/min|
|Temp. Thermocouple Slot||Standard|
|Driven Top Hood Opening||Auto|
|High Temperature Oil Supply||Auto|
|On Line Editing||Standard|
|Cooling Method||Forced-Air Motor and fan (Standard)|
|Payment Terms||L/C, T/T, Western Union, Paypal|
|Minimum Order||1 set|
|Lead Time / Delivery Time||30 Day(s)|
|Loading Info||By sea|
|Packing Info||Wooden case|
|Target Market(s)||North America, Oceania, Southeast Asia, Eastern Europe, Africa(except Middle East), Hong Kong/ Macao/ Taiwan, Latin America, Japan & Korea, Middle East & South Asia, Mainland China, Western & Southern Europe, Northern Europe, Central & Southern Asia, Middle East|
- Related Products
- Hit Products